The Benefits Of Sandblasting Your Boat

Having a sailboat or a yatch, for either commercial or personal purpose is quite a task, especially when it comes to maintaining it over the years to ensure smooth sail and upward market value. Special techniques adopted by professional in boat anti-foiling are required to clean and maintain your boat. This sandblasting is one the popular techniques used in boatyards and has been around for years.

You will find reputed services of sandblasting in Gold Coast for washing your boat by propelling fine fragments of materials at very high velocity, with the help of compressed air or steam, to clean up the boat’s surface. The resulting impact can remove of rust from steel that accumulates over the boats bottom due to continuous contact with sea water and rip gelcoat. The negative pressure induced by the velocity change in air flow has the capability to lift off the materials from the boat surface and its motion is accelerated on its way by the high air pressure.

Sandblasting is usually powered by an air compressor that hurls the particles toward the boat through a hose. The experts of Gold Coast sandblasting usually carry out this process indoors and the sandblast dust is contained within the area as they usually contain metal compounds such as copper and lead that can cause harm to marine life. Modern sandblasting techniques also use alternative blasting media that reduce the volume and cost of disposal. Some use baking soda to sandblast the boat, as the abrasive metals are sometimes too harsh on the boat surface, especially if the boat is aging and less robust, check this quality antifouling.

The benefits of sandblasting are many. Sandblasting is extremely effective in cleaning all parts of your boat, especially the boat bottom, where the maximum particulate matter accumulates. It can clean up not only the large areas but also penetrate to finer places like pistons, gears and valves. The parts of the boat that have been affected by rust are restored well, with all the undesirable materials removed. Sandblasting is a very quick and convenient method, especially in contrast to the manual cleaning method applied before it was widely adopted across almost all of the boatyards. A sandblasting tool, a pressure washer and a protective gear is all that is required for the process and takes quite less time for the entire process to be completed. Sandblasting is the cleaning method of choice for aluminum and steel boats, in removing all the foreign particles and rust. It leaves with a even finish and the particles do not adhere to the corners and nooks.

If you are looking for a quick and comprehensive cleaning of your boat, sandblasting will help you achieve your requirements. Regular cleaning and maintenance of your boat goes a long way in enhancing its lifetime and give a smooth ride every time it hits the water.